24.03.2021 | Latest

Webinar production oriented hardware design

Webinar production oriented hardware design

Correct layout as the cornerstone for cost-optimized production

Ginzinger electronic systems offers free webinars on November 25th and Dezember 2nd, 2020 on the subject of "Hardware design suitable for production". This involves working out how the foundation for cost-optimized production of assemblies is already laid during layout.

Electronic assemblies should be produced optimally, quickly and cost-effectively. However, it is often forgotten that the course is already set in the hardware design. A well thought-out layout achieves decisive time and cost savings relatively easily.

The two Ginzinger webinars show how unnecessary process steps and assembly problems can be avoided already in the development phase.


Hardwaredesign as foundation stone


In order to be able to carry out the production process for electronic assemblies optimally, quickly and cost-effectively, the foundations must be laid as early as the hardware design stage. Enormous opportunities lie hidden here. With an optimally thought-out circuit board layout, decisive time and cost savings can be achieved relatively easily.

Unnecessary process steps, badly soldered components, short circuits and solder bridges are thus prevented already in the development phase.

The benefits of a well thought-out design for the customer are obvious: faster production and inspection, lower costs and high product quality.
In the two webinars, participants will receive valuable tips and tricks to enable optimized production of developments.


The webinar content

Hardwaredesign bei Ginzinger

Hardwaredesign bei Ginzinger

The first webinar on 25 november will focus on component types and soldering processes:

  • different types of components
    + THT/PiH
    + THR/PiP
    + SMT/SMD
  • fields of application
  • soldering & soldering processes
    + basics
    + requirements for the pad design
    + soldering types (wave soldering, reflow soldering)
  • Tipps & Tricks from 30 years of experience
  • questions & answers

At the second webinar on dezember 2nd, after a short review
from Webinar 1 covers the following topics:

SMD Linie bei Ginzinger

SMD Linie bei Ginzinger

  • common placement processes
  • SMT assembly processes
    + components of the SMT line / SMT assembly
  • final commissioning and module tests
  • testing possibilities
    + function test
    + ICT
  • final assembly
  • Tipps & Tricks from 30 years of experience
  • questions and answers

target group:

• hardware developers & circuit board designers

time & place:

The webinars of Ginzinger electronic systems will take place on Wednesday, November 25th and Wednesday, December 2nd, 2020 from 14:00 to 15:00 o'clock in the Ginzinger Webinar Room.
Participation is free, places are limited. You can register here: https://www.ginzinger.com/de/events/


Do you have questions

or want to get in touch?