Seminar / 18.09.2024
Production-oriented hardware design
In order to be able to carry out the production process optimally and cost-effectively, the course must already be set in the hardware design. In the webinar, you will receive valuable tips that will enable problem-free production of your developments.
In order to be able to carry out the production process optimally, quickly and cost-effectively, the course must already be set in the hardware design. There are enormous opportunities here - with an optimally thought-out PCB layout, decisive time and cost savings can be achieved relatively easily.
Unnecessary process steps, poorly soldered components, short circuits, solder bridges etc. can be prevented as early as the development phase. In our afternoon seminar on "Production-ready hardware design", you will receive valuable tips that will enable problem-free production of your developments.
Your expert on the topic
The lecturer at the seminar is Ing. Stefan Kinzlbauer. Mr. Kinzlbauer has been working as a hardware developer at Ginzinger electronic systems for over 15 years.
He is a popular host and speaker at Ginzinger webinars on the topic of production-oriented design of electronics. He is also a key contributor to the popular Ginzinger EMS-Design-Guides.
Seminar contents:
- Different types of components and their areas of application
- Soldering & soldering processes
+ Basics
+ Requirements for the pad design
+ Soldering types (wave soldering, reflow soldering) - Common assembly processes
+Components of the SMT line
+SMT assembly - Final commissioning and assembly tests
- Testing options and final assembly
- Tips & tricks from 30 years of experience
- Questions & answers
target group:
- Hardware developers
- Printed circuit board designers
Date & place:
- Wednesday, September 18, 2024
- 14:00 to 17:00
- Ginzinger electronic systems Seminar room "Mailüfterl"