Webinar / 23.11.2022
Hardware design for production
To be able to carry out the production process optimally and cost-effectively, the course must already be set in hardware design. In the webinar, you will receive valuable tips that will enable trouble-free production of your developments.
An optimally thought-out PCB layout makes it relatively easy to achieve decisive time and cost savings. Unnecessary process steps, poorly soldered components, short circuits, solder bridges, etc. are already prevented in the development phase. The customer benefits of a well thought-out design are obvious: lower costs and high product quality.
In this first webinar on the topic of "Hardware design suitable for production", you will receive valuable tips that will enable trouble-free production of your developments. The focus of this appointment is on component types and soldering processes.
- Different types of components
- Application areas
- Soldering & Soldering Processes
+ Pad Design Requirements
+ Soldering types (wave soldering, reflow soldering)
- Tips & tricks from 30 years of experience
- Questions & Answers
- Hardware designer
- Printed circuit board designer
Date & place:
- 23. November 2022
- 15.00 to 16.00 Uhr
- Ginzinger electronic systems Webinar Room
Register now for free